NDT & Industrial Training Programs
Rexora is launching structured training and career-oriented technical learning programs for professionals seeking industry readiness. Be the first to know when registrations open.
Testing & QA/QC Capabilities
Radiography Testing (RT)
REXORA utilizes high-energy X-rays and gamma radiation under controlled conditions to examine the volumetric integrity of critical welds, castings, and structural fabrications without altering or damaging materials.
- Detection of internal porosity, slag inclusion, and lack of penetration
- Volumetric assessment in piping, pressure vessels, and structural welds
- Execution following ASME Section V and ISO 17636 protocols
- ASNT / ISO 9712 Level II certified technician deployment
Liquid / Dye Penetrant (LPT / DPT)
Rapid and cost-effective detection of surface-breaking discontinuities on non-porous metals, plastics, and ceramics using color-contrast and fluorescent dye systems.
- Identifies fatigue cracks, laps, seams, and cold shuts on weld toes
- Applicable to non-ferromagnetic alloys, stainless steel, and aluminum
- Solvent-removable and water-washable penetrant systems
- Compliant with ASME Sec V Art 6 and EN ISO 3452 standards
Ultrasonic Testing (UT)
REXORA uses high-frequency ultrasonic waves to evaluate internal thickness, detect subsurface laminations, and map hidden flaws within dense industrial components.
- Precise wall-thickness survey for in-service corrosion profiling
- Accurate measurement of defect depth, orientation, and severity
- Evaluation of heavy forgings, castings, and critical pipe butt welds
- Instant digital data acquisition and compliance reporting
Visual Testing (VT)
Our certified inspectors conduct thorough optical assessments using direct and remote visual techniques (borescopes/fiberscopes) to spot surface abnormalities before failure occurs.
- Assessment of weld profiles, undercut, root concavity, and alignment
- Identification of mechanical damage, wear, and atmospheric corrosion
- Inspection of internal pipeline bores and turbine chambers
- Compliance verification against fabrication drawings and AWS D1.1
Magnetic Particle Testing (MT)
Magnetic flux manipulation detects critical surface and shallow subsurface cracks in ferromagnetic structures including drill pipes, storage tanks, and heavy machinery.
- Dry powder and wet fluorescent magnetic particle applications
- High sensitivity to tight surface fatigue cracks and stress fractures
- AC/DC electromagnetic yoke testing for field operations
- Strict alignment with ASME Section V Article 7 requirements
Quality Assurance & Control (QA/QC)
End-to-end quality governance spanning vendor surveillance, welding procedure qualification (WPS/PQR), and material traceability across fabrication and erection phases.
- Preparation and auditing of Inspection & Test Plans (ITP)
- Welder performance qualification (WPQ) and material test reports (MTR)
- Third-party client representation and cross-border regulatory review
- Full alignment with ISO 9001, API, and client project mandates
Radiographic Film Interpretation (RTFI)
Expert analytical interpretation of exposed radiographic films under high-density illuminators to grade weld quality, reject out-of-spec defects, and issue authoritative sign-offs.
.jpg)
- Analysis of radiographic density, sensitivity, and image quality indicators (IQI)
- Discrimination of burn-through, lack of side-wall fusion, and slag lines
- Evaluation of cast valve bodies, pressure boundary joints, and cross-country lines
- Strict adherence to ASME B31.3, API 1104, and AWS criteria
Magnetic Flux Leakage (MFL)
Rapid screening technology utilizing strong magnetic saturation to reveal volumetric material loss, pitting, and underside corrosion in tank bottoms and pipeline tracks.
- High-speed scanning of aboveground storage tank (AST) floor plates
- Detection of both top-side and bottom-side corrosion pits
- Minimizes downtime with immediate topographic flaw mapping
- Fully complies with API 653 inspection standards
Eddy Current Testing (ET)
Electromagnetic induction testing for surface and sub-surface flaw detection in non-magnetic conductive tubing, condenser heat exchangers, and aircraft skins without removing paint.
- Heat exchanger and chiller tube bundle inspection
- Measurement of non-conductive coating thickness on metal substrates
- Inspection through protective coatings without paint stripping
- Detection of surface micro-cracks on fasteners and turbine blades
Leak Testing (LT)
Verifying the absolute pressure containment and environmental sealing of pressurized systems, pipelines, valves, and vacuum vessels using hydrostatic, pneumatic, or tracer gas techniques.
.jpg)
- Bubble emission testing (vacuum box & immersion techniques)
- Halogen & Helium mass spectrometer leak detection (high sensitivity)
- Pneumatic pressure drop monitoring for pipeline loops
- Executed per ASME Sec V Article 10 guidelines
Infrared / Thermography (IT)
Non-contact thermal imaging that identifies abnormal heat signatures, insulation breakdown, loose high-voltage electrical joints, and refractory degradation in energized equipment.
- Live electrical switchgear, busway, and transformer inspection
- Detection of refractory furnace lining thinning and steam trap leaks
- Zero-interruption predictive maintenance for critical plant uptime
- Calibrated radiometric reporting and trend analysis
Phased Array UT (PAUT)
Advanced multi-element probe technology electronically steering ultrasonic sound beams through multiple angles to produce computerized cross-sectional images of complex welds.
- Complete volumetric inspection replacing conventional radiography safely
- Real-time S-Scan and B-Scan cross-sectional weld visualization
- High probability of detection for planar flaws and crack tips
- Full digital data encoding and archiving for client audits
Time of Flight Diffraction (TOFD)
Diffracted ultrasonic wave technology that provides unmatched precision in flaw sizing and crack-height measurement, independent of weld orientation and beam angle.
- Most accurate volumetric crack height sizing method available
- Rapid inspection speeds using encoded mechanical crawlers
- Unrivaled detection of weld root defects, lack of fusion, and reheat cracks
- Commonly paired with PAUT for heavy-wall vessel qualifications
Built for every stage of your career
Fresh Graduates
B.E./Diploma students looking to enter the industrial workforce with practical skills.
Experienced Professionals
Upgrading existing skills with internationally-recognised industry certifications.
Career Changers
Switching seamlessly into NDT, inspection or safety from related technical fields.
A premium training experience
We bridge the gap between classroom theory and real-world industrial application.
Certified Instructors
Industry-experienced trainers with global field exposure.
Hands-on Training
Real equipment, real test specimens, real plant scenarios.
Global Certifications
ASNT, CSWIP, NEBOSH and IRATA pathway support.
Placement Support
Direct placement pipeline through Rexora's client network.
Let's build your project together.
Talk to our team about your manpower or career goals.